Reed Switch Settings - Bosch RADION B810 Installation Manual

RADION receiver SD
16.2

Reed switch settings

Set the detector to enable or disable the reed switch.
Notice!
Please note, insert the jumper onto the pin prior to installing
the battery. Failure to do so may result in unexpected operation
of the device.
Figure 16.2: Reed switch
Callout ￚ Description
1 ￚ No jumper disables the internal reed switch
2 ￚ Jumper on enables the internal reed switch
Bosch Security Systems B.V.
RADION universal transmitter | en
2020.05 | 13 | F.01U.261.834
83