Bosch RADION B810 Installation Manual page 21

RADION receiver SD
–
For UL installations, the RFBT-A shall be permanently mounted
using the 3M VHB 4956 double sided adhesive tape. The suitable
surfaces are:
–
–
–
–
–
–
–
–
–
–
–
–
RADION universal transmitter
During the installation of the device, the following items are
required by UL:
–
–
Bosch Security Systems B.V.
ￚP## Invisible Point = Yes (Keypads do not display alarm
activity from this point).
Aluminum
Galvanized steel
Stainless steel
Enameled steel
Nickel Coated ABS
Glass (with or without Silane Coating
PVC
Glass/Epoxy
PBT
Polycarbonate
Acrylic/Polyurethane paint
Polyester paint
For UL installations, an UL Listed burglar alarm dry contact
device shall be connected if the external terminal is used.
When external contact is configured for UL hold up
installations, a hold up device such as potter electric model
HUB is to be connected to the external contact. For
programming, refer to the appropriate control panel manual
"Special programming required for a hold up device." Point
shall be programmed as stated below:
– P## Type = 1 Instant on open or short (Point is
constantly armed regardless of the status of the
system).
– ￚP## Invisible Point/Silent Bell = Yes (Keypads do not
display alarm activity from this point).
RADION receiver SD | en
2020.05 | 13 | F.01U.261.834
21