Leds - Bosch RADION B810 Installation Manual

44 en | RADION repeater
Frequency
Table 4.4: Specifications
4.4

LEDs

Refer to the external LED indicator to get operational status.
LED Condition
On (Normal)
Off
Continuous
Flash: 1 sec rate
for 5 sec
Continuous
Flash: A 3-pulse
signal, followed
by a short delay
after the 3
pulse
Continuous
Flash: A 2 flash
pattern
continuous pulse
between On and
Off states with a
short delay after
the 2
Tab. 4.5: LED descriptions
2020.05 | 13 | F.01U.261.834
433.42 MHz
Pattern Description
–
–
–
–
rd
–
–
nd
pulse
Indicates the repeater is functioning
normally.
Indicates there is a power failure to the
repeater, or that the receiver is not
wired correctly.
Indicates the repeater is being powered
up, and conduction manufacturing test
initializations.
Indicates the repeater has experienced
a low battery condition.
Indicates an AC power failure is
detected.
A communication failure within internal
hardware components inside the
receiver
RADION receiver SD
Bosch Security Systems B.V.