RADION receiver SD
Notice!
For UL installations, the signal shall be checked to display
"good."
3.4.8
Complete the installation
Depending on the results of testing the RADION system from a
system-wide approach (walk test, signal strength and margin
tests), make the appropriate modifications/adjustments to
complete the install process.
3.4.9
B810 system test
Overall system test
It is recommended by UL to test the entire system at least once
every year, including the B810 receiver by an installer to ensure
proper functionality of the RADION system.
3.5
External LED states
The receiver utilizes the External LED to show various states of
the receiver. These states fall into the following three
categories:
–
–
–
–
–
Normal state:
The receiver enters a normal state when it has passed all power
self-tests and has established a communication link with the
control panel . The receiver remains in this state as long as the
communication link is present, and no other issues are present
that would prevent the receiver from operating in a normal
condition.
LED condition
Bosch Security Systems B.V.
Normal State
Communication Error State
Trouble State
Maintenance state
Off state
RADION receiver SD | en
State description
2020.05 | 13 | F.01U.261.834
33