Radion Receiver Sd; Check-In Interval And Power Level For Radion Devices - Bosch RADION B810 Installation Manual

RADION receiver SD

3 RADION receiver SD
The receiver connects RADION wireless peripherals to
supported Bosch control panels using the SDI2 bus connection.
A compatible control panel powers the receiver through the
wiring connection. Features include:
–
–
–
–
–
–
3.1 Check-in interval and power level for
RADION devices
The RADION suite of devices come in three varieties and are
compatible with three RADION receivers. The three varieties are:
-A versions (ex. RFRP -A), Non -A versions (ex. RFRP), or CHI
versions (ex. RFRP-CHI).
Each variety of detector was originally designed for a certain
geographical region, and catered to that specific region's
regulatory requirements. The B810 receiver supports all device
versions. The slight differences are described below:
–
–
Bosch Security Systems B.V.
Easy addressing via a rotary switch
Cover and wall tamper protection
RFID and configuration data are contained in persistent
memory
External LED
Detection and reporting radio frequency interference
Supports supervision of wireless points (504), keyfobs
(1000), and repeaters (8)
-A version. The -A version is called the "American" version
and complies with applicable regulatory requirements, and
is used in North and South America. -A devices are sold in
North and South America. The supervision message is 3 dB
lower than the alarm message, and the supervision interval
is (approx.) every 65 minutes.
Non -A version. The Non -A version is the European version
and complies with applicable regulatory requirements in
Europe. Non - A devices are sold in Europe, Africa, and
RADION receiver SD | en
2020.05 | 13 | F.01U.261.834
13