Testing - Bosch RADION B810 Installation Manual

48 en | RADION glassbreak
–
–
–
–
–
Avoid locations that expose the detector to possible false-alarm
sources such as:
–
–
–
–
–
–
–
Notice!
Glassbreak detectors are intended only as a component of a
perimeter protection system. Use glassbreak detectors in
conjunction with motion detectors.
5.2

Testing

Test the detector at least once yearly. Use the Sentrol 5709C
hand-held tester to enter the sensor into test mode and to test
the alarm.
Test the sensor alarm
To test the sensor functionality, enter the detector into test
mode. In normal mode, the sensor does not generate an alarm
on sound signals from the tester unless the tester is held next to
the sensor.
Each time the sensor alarms, it also goes into test mode for one
minute.
Initiating test mode with the Sentrol 5709C hand-held tester:
2020.05 | 13 | F.01U.261.834
Small utility rooms
Rooms with noisy equipment (white noise) such as air
compressors, bells, and power tools
Rooms smaller than 10 ft x 10 ft (3 m x 3 m)
Rooms with lined, insulating, or sound supressing drapes
A corner of a room
Glass airlocks and vestibule areas;
Kitchens;
Corner mounting;
Residential car garages;
Stairwells
Bathrooms; and
Small acoustically live rooms
RADION receiver SD
Bosch Security Systems B.V.