Garage Door Opener - Porsche Taycan Owner's Manual

Garage door opener (HomeLink

Garage door opener

A
(HomeLink )
®
B
C
General Safety Instructions
D
WARNING
E
F
If persons or animals are in the movement area of
G
the operated equipment, there is a risk of injury
H
while the garage door opener is being operated or
programmed.
I
e Make sure there are no persons, animals or ob-
J
jects in the movement area of the operated
K
equipment while the HomeLink
operated or programmed.
L
e Observe the safety instructions for the original
M
remote control.
N
Operating principle
O
The HomeLink system can be used to operate up to
®
P
eight radio-controlled devices (garage doors/prop-
Q
erty gates, security systems, house lighting) from
the vehicle via profiles in the central display.
R
> Read the instructions for the original remote
S
control.
T
Information
U
For information on the compatibility of your vehicle's
V
HomeLink system with the original remote control:
®
e Contact an authorized Porsche dealer.
W
> Visit www.homelink.com or call the toll-free
X
hotline on 1–800–355–3515.
Y
Z
120
)
®
e Before selling your vehicle, remember to delete
the garage door opener signals.
Pinching, crushing or
Teaching garage door opener
impact through operated
b b Operational readiness established.
equipment
b b Vehicle is positioned to allow visual contact with
remote-controlled equipment and is within the
receiver range (signal is transmitted).
Systems with remote control
1.
2. Follow the instructions on the screen. During
system is being
®
programming, aim the remote control at the
overhead console from the height of the center
console.
Systems without rolling code system:
The profile is taught.
– or –
Systems with rolling code system:
The profile is created. Manual synchronization
between the HomeLink
quired to complete the teaching process:
3. Follow the instructions on the screen.
> Read and follow the instructions for the
The profile is taught.
Information
e HomeLink e Configure new profile
®
and vehicle is still re-
®
original remote control.
Information
If the signals cannot be stored despite having care-
fully read this chapter and the operating instructions
for the original remote control:
e Contact an authorized Porsche dealer.
e Make sure that there is a new battery in the ga-
rage door opener remote control. Insufficient
battery power can cause malfunctions in signal
transmission. The system in the vehicle then
learns an incorrect code, which cannot be reliably
recognized.
e Check the compatibility of the vehicle's
HomeLink system with the original remote
®
control.
Systems without remote control (FixKit
receiver)
e HomeLink e Configure new profile e
1.
®
2. Select the desired option.
3. Follow the instructions on the screen.
The profile is taught.
Using the garage door opener
Calling up configured HomeLink
manually
b b Operational readiness established.
b b Vehicle is positioned to allow visual contact with
remote-controlled equipment and is within the
receiver range (signal is transmitted).
e HomeLink
1.
®
2. Select the desired profile.
profiles
®