Porsche Taycan Owner's Manual page 189

Table of Contents

Advertisement

Changing the desired distance
> Please see chapter "Adaptive Cruise Control
(ACC)" on page 42.
Overriding speed and distance
control temporarily
> Please see chapter "Adaptive Cruise Control
(ACC)" on page 42.
Interrupting and resuming speed
and distance control
> Please see chapter "Adaptive Cruise Control
(ACC)" on page 42.
Braking to a standstill and driving
off again
> Please see chapter "Adaptive Cruise Control
(ACC)" on page 42.
Activating and deactivating con-
sideration of speed limits
e
e Assist e
e Assistance system settings
e Porsche InnoDrive e Consider speed limits
Manually considering a detected speed limit
If consideration of speed limits is deactivated, PID
still displays detected events such as bends, inclines
and vehicles driving ahead. A detected speed limit
can be accepted manually by the driver.
b b Consider speed limits deactivated.
b b The speed limit is detected and appears gray in
the status display.
e Press the control lever up (RESUME).
The set speed limit is displayed in blue in the
status display.
Setting the maximum speed
On roads with no speed limit or if no speed limit has
been detected, the maximum preset speed is used
as the desired speed. If a speed limit is detected, the
following applies:
– If the maximum speed is above the speed limit,
the speed limit is adopted as the new desired
speed.
– If the maximum speed is below the speed limit,
the maximum speed is adopted as the new de-
sired speed.
Setting the maximum speed
e
e Assist e
e Assistance system settings
e Porsche InnoDrive e Maximum speed
The set maximum speed remains active until it is
reset, even with a change of driver or when the ve-
hicle is restarted.
Additional information
Example of how Porsche InnoDrive works
The example below compares two scenarios when
driving into a city with a 30 mph (50 km/h) speed
limit - one scenario with consideration of speed lim-
its activated and the other with consideration of
speed limits deactivated.
Porsche InnoDrive (PID)
Consider speed limits activated
Fig. 136: Example of driving with Consider speed limits
activated
A
The vehicle regulates the speed to the de-
tected speed limit of 60 mph (100 km/h).
B
The driver sets the desired speed
3 mph (5 km/h) higher based on the de-
tected speed limit. The vehicle regulates the
speed to 63 mph (105 km/h).
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
187

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents