Porsche Taycan Owner's Manual page 41

– Driving forward into parking spaces perpendicu-
lar to the road, between two parked vehicles. A
parking procedure can also be started here if the
front of the vehicle is already positioned in the
parking space.
Pulling out
Pulling out works if the vehicle is moved forward out
of a parking space parallel to the road and the park-
ing space is approx. 3 ft. (1 m) longer than your
vehicle.
Parking space search
Starting a parking space search
Fig. 7: Active Parking Support
A Select the parking or pulling-out side
B Select the parking direction.
The parking space search starts in the background
as soon as the prerequisites are met. The parking
space can be selected even if the display does not
switch on until after you have driven past the park-
ing space.
1. Tap on the center console operating panel.
– or –
e Assist e ParkAssist
On the central display
e
The parking space search is displayed.
2. Drive past the parked vehicles at low speed.
3. Observe the information on the central display.
4. Parking space search is first active on the pas-
senger side.
In order to change the parking side, activate the
corresponding turn signal (left/right).
– or –
Tap the corresponding icon A on the central
display.
5. On finding a suitable parking space, stop the
vehicle.
When a parking space is found, it will appear as a
blue space on the central display. If several
parking directions are possible, they will be
displayed.
6. If in the display an arrow appears in front of the
vehicle, drive the vehicle further forward.
A parking procedure can only be started if a blue
vehicle is displayed in the desired parking space.
7. To select the parking space, tap the parking
space symbol B with the desired parking direc-
tion on the central display.
on the center console operating panel pulsates
blue.
Canceling parking space search
e Tap
on the central display.
The search is aborted automatically:
– If the vehicle speed exceeds 28 mph (45 km/h).
– When transmission range R is selected.
Parking procedure
Starting the parking procedure
b b Vehicle is stationary.
b b Brake pedal pressed.
Active Parking Support
b b Parking space selected on the central display.
1. Take your hands off the steering wheel and keep
the brake pedal pressed.
2. Tap on the center console operating panel.
The color of the symbol changes to blue.
3. Release the brake pedal.
The parking procedure starts.
4. Observe the information on the central display.
To cancel the parking procedure:
> Please see chapter "Aborting the parking
procedure" on page 40.
A message appears when the vehicle reaches the
target position.
Transmission range P is selected and the parking
brake is applied.
5. Take control of the vehicle.
If the vehicle is not taken over, a message ap-
pears and operational readiness will then be
switched off.
Starting the pulling-out procedure
b b Operational readiness established.
b b Vehicle has not been moved yet.
b b Brake pedal pressed.
b b Transmission range D selected.
1. Take your hands off the steering wheel and keep
the brake pedal pressed.
2. Tap on the center console operating panel.
– or –
e Assist e ParkAssist
On the central display
e
3. In order to change the pulling-out direction, ac-
tivate the corresponding turn signal (left/right).
– or –
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
39