Porsche Taycan Owner's Manual page 214

Speed Limiter (LIM)
Interrupting and resuming speed
A
limiting
B
Due to the interruption, the system switches to
C
passive standby mode and remains in standby until
it is activated again manually.
D
E
Interrupting control
e Press the control lever down (CANCEL).
F
The speed limiter is passive.
G
The previously set maximum speed or the cur-
H
rently detected speed limit is displayed in gray.
I
Resuming control
b b The current driving speed is lower than the set
J
maximum speed.
K
e Press the control lever upward once (RESUME).
L
The speed limiter is active.
– or –
M
b b The current driving speed is higher than the set
N
maximum speed.
1. Press the control lever upward once (RESUME).
O
2. Take your foot off the accelerator or press the
P
brake pedal to bring the speed of the vehicle to
below the displayed maximum speed.
Q
– or –
R
Press the control lever upward twice (RESUME).
S The vehicle is then slowed down, until the set
maximum speed or the currently detected speed
T
limit is reached again.
U
The speed limiter is active.
V
W
X
Y
Z
212
Information
The speed limiter is interrupted if another driver as-
sistance system is selected. The last maximum
speed entered remains in the system and is resumed
when the speed limiter is reactivated. If the speed
limiter is active, then the currently detected speed
limit is used.
Overriding the speed
limiter temporarily
The speed limitation can be temporarily overridden
by initiating a kickdown. This can be useful when
passing, for example.
b b Speed limiter active.
e Accelerator pedal pressed down fully.
The system is temporarily passive.
A warning signal sounds.
The speed limiter symbol with the set maximum
speed flashes on the instrument cluster.
To resume control:
e Press the control lever up (RESUME).
If the current driving speed is above the set
maximum speed, the vehicle is slowed down un-
til the set maximum speed is reached again.
– or –
e Take your foot off the accelerator or press the
brake pedal to bring the speed of the vehicle to
below the displayed maximum speed.
The speed limiter is active. The previously set
maximum speed or the currently detected speed
limit is resumed.
Activating and deactivating the
adaptive speed limiter
e e Assistance e e Assistance system
settings e Adaptive Speed Limiter e Consider
recognized speed limits
The currently detected speed limit is set as the
maximum speed.
Setting the maximum speed
On roads with no speed limit or if no speed limit has
been detected, the maximum speed that is set is
used as the top speed.
Setting the maximum speed
e e Assistance e e Assistance system
settings e Adaptive Speed Limiter e Maximum
speed
The set maximum speed remains active until it is
reset, even with a change of driver or when the ve-
hicle is restarted.
Using a personal speed limit
The personal speed limits function allows you to set
your own speed limit. A warning message appears
and a warning signal sounds if the limit is exceeded.
One way the function can be used is as a reminder of
the maximum permitted speed for a particular type
of tire that was fitted.
Setting and activating a personal speed limit
Two speed limits can be set, but only one can be
activated at any one time.
e e Assistance e e Assistance system
settings e Personal speed limits