Porsche Taycan Owner's Manual page 65

Switching on precooling/heating
Central display
e A/C e Precool/h.
1.
2. Tap Precool/heat.
Precooling/heating switches off automatically after
60 minutes at the latest when the vehicle is ready to
drive or when the vehicle is stationary.
Center console control panel
Fig. 28: Activating preconditioning
1. Touch the softkey.
2. Touch the A softkey.
For preconditioning, the most recent precool/heat
settings are used.
Information
If precool/heat is switched on or preconditioning is
started during charging, full precool/heat power is
available irrespective of the charging power.
During active charging with a very low charging
power, precool/heat can cause the high-voltage
battery to discharge.
Air conditioning Advanced Climate Control (2/4 zone automatic air conditioning)
Switching off precooling/heating
Central display
e A/C e Precool/h.
1.
2. Tap Precool/heat.
This also stops precooling/heating initiated by a
precool/heat timer.
Programming and activating precooling/
heating via a precool/heat timer
The interior temperature can be precooled/heated
by precool/heat right up to the departure time using
the precool/heat timer.
Each precool/heat timer can be set to start once
(single timer) or at regular intervals (recurring timer).
Central display
e A/C e Precool/h.
1.
2. Set the air conditioning zones, temperature and
seat activation individually.
The configured settings are adopted for all
timers.
3. Tap Manage timer.
4. Tap and activate Precool/heat in Timer
Settings.
5. Tap Date and departure time and set the days
or date and time of the desired departure time.
6. Tap Date and departure time then Timer
Settings to close.
7. Activate the desired timer entry in Timer.
The selected Precool/heat function is maintained for
up to 10 minutes after the set air conditioning peri-
od. Automatic mode can be adapted after opera-
tional readiness has been established.
> Please see chapter "Air conditioning Advanced
Climate Control (2/4 zone automatic air condi-
tioning)" on page 53.
Deactivating the precool/heat timer
Central display
e A/C e Precool/h.
1.
2. Tap Manage timer.
3. Deactivate the desired timer.
– or –
Tap and deactivate the Precool/heat option.
This does not stop precooling/heating that has al-
ready started.
Setting precooling/heating individually
Setting air conditioning zones on the central display
e A/C e Precool/h.
1.
2. Climate zones
3. Activate the desired air conditioning settings.
The vehicle seats are heated or ventilated (depend-
ing on equipment). The vehicle automatically regu-
lates the settings for the vehicle seats, depending on
the outside temperature. If driver seat heating is ac-
tive, the steering wheel will also be heated (depend-
ing on equipment).
Setting the target temperature on the central
display
e A/C e Precool/h.
1.
2. Tap Temperature.
3. Set the temperature you want using the slider.
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
63