Porsche Taycan Owner's Manual page 188

Porsche InnoDrive (PID)
Temporarily passive
A
The system is temporarily passive when the accel-
B
erator is pressed while PID is active.
C
– A message indicating that PID is passive appears
in the instrument cluster.
D
– The status display is gray.
E
– There is no control.
– The stored target speed and the selected target
F
distance are retained.
G
– The system is active again after the accelerator
H pedal is released.
I
Switching PID on and off
J
The system that was selected last is always acti-
vated. The system is initially in passive mode when
K
switched on. It must first be activated before the
L
control function will start working.
M
Switching on PID
b b No other driver assistance system is activated.
N
1. Press button R on the control lever.
O
The options menu for the driver assistance sys-
tems appears on the instrument cluster.
P
2. Select PID using the rotary push button on the
Q
steering wheel and press to confirm.
PID is switched on and passive.
R
Switching from an already activated driver assis-
S
tance system to PID
T
1. Press button S on the control lever.
U
The options menu for the driver assistance sys-
tems appears on the instrument cluster.
V
2. Select PID using the rotary push button on the
W
steering wheel and press to confirm.
PID is switched on and passive.
X
Y
Z
186
Information
An activated driver assistance system will be acti-
vated again even after switching off and restoring
operational readiness.
Switching off PID
e Press button R on the control lever.
The set desired speed is deleted.
The desired distance is stored.
Activating PID
b b PID switched on.
Setting the current driving speed as the desired
speed
1. Accelerate to the desired speed using the accel-
erator pedal.
2. Briefly press the control lever forward (position
1) and release the accelerator pedal.
PID is active. The current driving speed is set as the
desired speed in the status display and is automati-
cally maintained unless a slower vehicle is detected
ahead.
Setting the detected speed limit as the desired
speed
b b Consider speed limits activated.
e Press the control lever upward (RESUME) and
release the accelerator pedal.
PID is active. The currently detected speed limit
is set as the desired speed in the status display
and is automatically maintained unless a slower
vehicle is detected ahead.
Information
– Speed limits are only considered when PID is
activated.
– On roads with no speed limit, the set maximum
speed is used.
– The driver assistance system can be switched
using the S button even when the system is ac-
tive. The newly selected system is in passive
mode after you switch systems.
Changing the desired speed
The set desired speed or the recognized speed limit
can be changed by pressing the control lever.
b b PID is active.
Increasing the speed
e Press the control lever forward (position 1).
– Brief press = 1 mph (1 km/h) increments
– Press and hold = 5 mph (10 km/h)
increments
Reducing the speed
e Pull the control lever (position 2).
– Brief pull = 1 mph (1 km/h) increments
– Pull and hold = 5 mph (10 km/h) increments
Resetting the changed desired speed to the
detected speed limit
e Briefly press the control lever up (RESUME).
The currently detected speed limit is confirmed.
Discarding an automatically accepted speed
limit
e Long-press the control lever up for longer
(RESUME).
The set speed limit is discarded and the previ-
ously set desired speed is retained.