Porsche Taycan Owner's Manual page 104

Cruise Control (CC)
A
Switching from an already activated driver assis-
tance system to cruise control
B
1. Press button S on the control lever.
C
The options menu for the driver assistance sys-
tems appears on the instrument cluster.
D
2. Select Cruise control using the rotary push but-
E
ton on the steering wheel and press to confirm.
Cruise control is switched on and passive.
F
The operating status appears gray in the status dis-
G
play. There is no speed stored.
H
Information
I
The last selected driver assistance system is re-
J
tained even after switching it off and restoration of
operational readiness is switched on.
K
L
Switching off cruise control
e Press button R on the control lever.
M
The memory is cleared and the readiness symbol
N
disappears.
O
Activating cruise control
P
b b Cruise control switched on.
Q
b b Speed is higher than 20 mph (30 km/h).
R
1. Accelerate to the desired speed using the accel-
erator pedal.
S
2. Briefly press the control lever forward (position
T
1).
Cruise control is active.
U
The current driving speed appears green in the sta-
V
tus display and is maintained automatically.
W
Changing the desired speed
X
b b Cruise control active.
Y
Increasing the speed
e Press the control lever forward (position 1):
Z
102
– Brief press = 1 mph (1 km/h) increments
– Press and hold = 5 mph (10 km/h)
increments
Reducing the speed
e Pull the control lever (position 2):
– Brief pull = 1 mph (1 km/h) increments
– Pull and hold = 5 mph (10 km/h) increments
Information
The speed can be increased using the accelerator
pedal. This does not change the stored value. The
stored value is set again when you take your foot off
the accelerator pedal.
Interrupting cruise control and re-
suming control
Following interruption, cruise control switches to
standby mode and remains in standby until it is ac-
tivated manually again.
Interrupting control
e Press the control lever down (CANCEL).
– or –
e Press the brake pedal.
– or –
e Move selector lever to position N.
Cruise control is passive. The set value for the
desired speed remains stored. The status display
changes from green to gray.
Cruise control operation is interrupted auto-
matically in the following situations:
– The vehicle speed is above or below the set
speed for a certain time.
– Porsche Stability Management (PSM) is in con-
trol mode.
Resuming control
e Press the control lever up (RESUME).
Cruise control accelerates or brakes the vehicle
to the stored speed.