Porsche Taycan Owner's Manual page 200

Roof Transport System
A
B
C
D
E
F
G
H
I
J
K
L
Fig. 151: Closing and securing the cover flaps
M 5. Close cover flaps H on the carriers all the way
and mount the desired attachment module (e.g.
N
roof box, bicycle rack) onto the carrier. Finally,
secure the cover flaps with wrench E.
O
P
Q
R
S
T
U
V
W
X
Y
Z
198
Fig. 152: Cutting the profile covering to size and at-
taching it
6. To protect against moisture and dirt and prevent
wind noises, cut profile covering C to size and
push it into the carriers from the side, or press it
into the carriers from above.
Information
After driving 30 miles (50 km), retighten all screws
on the carriers and load-carrying devices.
Installing attachments
Fig. 153: Installing attachments
1. Undo the cover flaps with the wrench and fold
them back.
2. Insert the attachments into the existing T groove.
3. Close the cover flaps and secure them with the
wrench.
4. Follow the respective installation instructions
when mounting and anchoring the attachments
in place.
Closing the profile cover
To protect against moisture and dirt and avoid wind
noises, close the T groove on the profile cover when
attachments are not in use.