Porsche Taycan Owner's Manual page 47

Symbol Meaning
ACC is active at the set desired
speed.
A vehicle was detected ahead while
the desired speed was set. A vehicle
symbol is displayed instead of the
cruise control symbol.
Operating modes
Passive
This mode is set after switching on and when ACC is
active after pressing the brake pedal and after
pressing down the control lever (CANCEL).
– The status display F is gray.
– There is no control.
– The set desired speed and the set desired dis-
tance are retained.
Active
This mode is set after setting the speed, after re-
suming control (RESUME) and after temporarily
overriding control by pressing the accelerator pedal.
– The status display F is green.
– Speed and distance to the vehicle ahead are
controlled.
Temporarily passive
This mode is set while the accelerator pedal is
pressed when ACC is active.
– A message indicating that ACC is passive ap-
pears in the instrument cluster.
– The status display F is gray.
– There is no control.
– The set desired speed and the set desired dis-
tance are retained.
– Control is active again after releasing the accel-
erator pedal.
Switching ACC on and off
The system that was selected last is always
switched on. The system is initially in passive mode
when switched on. It must first be activated before
the control function starts working.
Switching on ACC
b b A driver assistance system is not yet switched
on.
1. Press button R on the control lever.
The options menu for the driver assistance sys-
tems appears on the instrument cluster.
2. If ACC is not already selected, select ACC using
the rotary push button on the steering wheel and
press to confirm.
ACC is switched on and passive.
Switching from an already activated driver assis-
tance system to ACC
1. Press button S on the control lever.
The options menu for the driver assistance sys-
tems appears on the instrument cluster.
2. Select ACC using the rotary push button on the
steering wheel and press to confirm.
ACC is switched on and passive.
Information
An activated driver assistance system will be acti-
vated again even after switching off and restoring
operational readiness.
Switching off ACC
e Press button R on the control lever.
Adaptive Cruise Control (ACC)
The set desired speed is deleted.
The desired distance is stored.
Activating ACC
b b ACC switched on.
1. Accelerate to the desired speed using the accel-
erator pedal.
2. Briefly press the control lever forward (position
1) and release the accelerator pedal.
ACC is active.
The current driving speed is set as the desired
speed.
The current desired speed is green in the status dis-
play and is automatically maintained unless a slower
vehicle is detected ahead.
Changing the desired speed
The set desired speed can be changed by pressing
the control lever.
b b ACC is active.
Increasing the speed
e Press the control lever forward (position 1):
– Brief press = 1 mph (1 km/h) increments
– Press and hold = 6 mph (10 km/h)
increments
Reducing the speed
e Pull the control lever (position 2):
– Brief pull = 1 mph (1 km/h) increments
– Pull and hold = 6 mph (10 km/h) increments
The set desired speed is indicated by the outer line
at the edge of the speedometer and appears blue in
the status display F. The display turns green as soon
as the set desired speed is reached.
Changing the desired distance
The desired distance from the vehicle ahead can be
set in 5 stages. Stage 3 is recommended. The
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
45