Porsche Taycan Owner's Manual page 187

Controls
Fig. 134: Control lever for driver assistance systems
R Switch systems on/off and open options menu
S Open options menu (when system is switched on)
1 Set/increase the desired speed
2 Reduce the desired speed
3 RESUME: Resume control, adopt speed/confirm speed
limit
4 CANCEL: Interrupt control
Display elements
Fig. 135: PID display
A Own speed
B Event up ahead (display on the speedometer and via
symbols)
C Set speed
D Status display
Symbols
Symbol Meaning
PID is passive.
PID is passive with the desired speed
set.
Porsche InnoDrive (PID)
Symbol Meaning
PID is active with the desired speed
set.
PID is active. A speed limit was de-
tected ahead or the set desired speed
has not yet been reached.
A vehicle was detected ahead while
the desired speed was set. A vehicle
symbol is displayed instead of the
speedometer symbol.
Operating modes
Passive
The system is passive after switching on and when
PID is active after pressing the brake pedal and after
pressing down the control lever (CANCEL).
– The status display is gray.
– There is no control.
– The stored speed setting and the selected dis-
tance are retained.
Active
This status is active after setting the desired speed,
after resuming control (RESUME) and after tempo-
rarily overriding control by pressing the accelerator.
– The status display is green or blue.
– Speed and distance to the vehicle ahead are
regulated in line with the detected speed limit (if
activated) and the road features.
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
185