Porsche Taycan Owner's Manual page 209

Fig. 164: Removing and installing headrests on rear seats
Removing
1. Push headrest up as far as it will go.
2. Fold the rear seat backrest roughly half-way
forward.
3. Press the A and B buttons and at the sime time
push the headrest upward until the B button re-
mains locked in place.
4. Remove the headrest and stow it safely in the
vehicle.
5. Adjust and engage the rear seat backrest if
necessary.
Interchanging headrests
WARNING
The individual headrests are designed specifically for
use on the respective seats. If the headrests are not
fitted on the correct seats during re-installation, this
will increase the risk of serious injury.
e Make sure that the headrests are not inter-
changed during re-installation.
Installing
1. Fold the rear seat backrest roughly half-way
forward.
2. Insert headrest into the guides and push it down
until it locks with an audible click.
3. Press button A and push the headrest down fully.
It should no longer be possible to pull the head-
rest out of the backrest.
4. Adjust and engage the rear seat backrest.
Folding down rear seat backrest
The rear seat backrests can be folded forward indi-
vidually to make the luggage compartment larger.
NOTICE
Risk of damage from objects on the rear seats.
e Do not place objects on the seats when folding
the backrests forward.
Information
The backrests on the left and center rear seats are
connected. When you fold the left backrest forward,
the center backrest will also fold over.
The backrest on the center rear seat can also be
folded forward separately (depending on
equipment).
Folding outer rear seat backrests forward
Fig. 165: Folding outer rear seat backrests forward
1. Push the headrests down.
> Please see chapter "Adjusting headrests" on
page 205.
2. Press the release button A and fold the backrest
forward.
Seats
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
207