Table of Contents
Advertisement
1.2
Installation Overview
Installation and
power up is
successful when
the PWR LED turns
Red.
Apply power to the
receiver (refer to
Section 6.2.1.1 on
page 77 for cable
specifics)
1.2.1
Mounting the Antenna
When installing an antenna:
•
Mount the antenna on a secure, stable structure capable of safe operation in the specific environment
•
Choose an antenna location with a clear view of the sky so that each satellite above the horizon can be
tracked without obstruction
•
For optimal performance, select a low multi-path environment
17
COM1 Port and LED
COM2 Port and LED
COM3 Port and LED
I/O Port
Connect the receiver to a computer or other data communications
equipment (serial cable shown, Section 6.2.1.2 on page 78). A USB cable
may be used instead (refer to Section 6.2.2 on page 80 for cable specifics)
Figure 3: Typical Receiver Installation
Connect the GNSS antenna
to the receiver with an
antenna RF cable (refer to
the antenna manual for
details)
OSC Port
GPStation-6 User Manual Rev 2
Installation
Advertisement
Table of Contents
