Miele DO 7860 Operating And Installation Instructions page 9


Ensure that the connection data on the Dialog oven's data plate
(voltage and frequency) matches the mains electricity supply. This
data must correspond in order to avoid the risk of damage to the
Dialog oven. Compare this before connecting the appliance to the
mains electricity. If in any doubt, consult a qualified electrician.

Multi-socket adapters and extension leads do not guarantee the
required safety of the appliance. Do not use these to connect the
Dialog oven to the mains electricity supply.

For safety reasons, this Dialog oven may only be used after it has
been built in.

This Dialog oven must not be installed and operated in mobile
installations (e.g. on a ship).

Risk of injury due to electric shock. Any contact with live
connections or tampering with the electrical or mechanical
components of the Dialog oven will endanger your safety and may
lead to appliance malfunctions.
Do not open the Dialog oven housing under any circumstances.

The manufacturer's warranty will be invalidated if the appliance is
not repaired by a Miele approved service technician.

Miele can only guarantee the safety of the appliance when original
Miele spare parts are used. Faulty components must only be
replaced by original spare parts.

There are 2 seals around the door. These seals must never be
removed.

If the mains connection cable is damaged, it must be replaced
with a special connection cable by a suitably qualified and
competent person (see "Installation - Electrical connection").
Warning and safety instructions
9