Miele DO 7860 Operating And Installation Instructions page 105

Problem
Maximum operating hours
appears in the
reached
display.
F32 appears in the
display.
F33 appears in the
display.
 and a fault code
not listed here
appears in the
display.
Function currently not
appears in the
available
display after selecting
the Descale function.
Moisture control faulty -
Automatic programmes
will operate without
appears in
moisture
the display after
selecting an
Automatic
programme.
Programmes using
moisture will not take
in water.
Possible cause and remedy
The Dialog oven has been operating for an unusually
long time. This has triggered the safety switch-off
function.
 Confirm with OK. Touch the  sensor control to
delete the message
The Dialog oven is ready to use again.
The door lock for pyrolytic cleaning has not locked.
 Switch the Dialog oven off and then back on again.
Start the pyrolytic cleaning programme again.
 If the message appears again, contact Miele.
The door lock for pyrolytic cleaning has not opened.
 Switch the Dialog oven off and then back on again.
 If the door lock still does not deactivate itself,
contact Miele.
A fault has occurred that you cannot resolve.
 Call Miele.
The steam injection system is faulty.
 Call Miele.
The steam injection system is faulty.
 Call Miele.
Automatic programmes can be run without using
moisture.
Demo mode is active. You can select menu options in
the display and the sensors, but the steam injection
system pump will not work.
 Deactivate demo mode by selecting
Showroom programme
The pump for the steam injection system is faulty.
 Call Miele.
Problem solving guide
Process finished .
Settings
| |
Demo mode Off
|
.
105