Evaporate Residual Moisture - Miele DO 7860 Operating And Installation Instructions

Functions using moisture
 Select
Start .
The burst of steam will be released.
Burst of steam active
display.
 Proceed as described to release
further bursts of steam as soon as
Start Manual burst of steam
After the final burst of steam,
steam finished will appear in the display.
 Continue cooking until the end of the
programme.
Time-controlled
The Dialog oven will release the burst of
steam at the specified time.
Burst of steam active
steam is being released.
After the final burst of steam,
steam finished will appear in the display.
 Continue cooking until the end of the
programme.
66
appears in the
appears.
Burst of
appears when the
Burst of

Evaporate residual moisture

When cooking using the addition of
moisture, the water will be equally
distributed between the number of
bursts of steam and used up as long as
the programme is not interrupted.
If a programme using the addition of
moisture is manually interrupted before
all the bursts of steam have been
injected or if there is a power cut, the
water for these unused bursts of steam
will remain in the steam injection
system.
The next time M Chef + Moisture
,
Plus Moisture Plus
Automatic programme with moisture is
used,
Evaporate residual moisture?
appear in the display.
 It is best to start the evaporation of
residual water straight away so that
only fresh water is used during the
next cooking programme.

Danger of injury caused by
steam.
Steam can cause scalding.
Do not open the door during a burst
of steam.
Depending on the amount of water,
evaporation of residual water can take
up to 30 minutes.
The oven compartment is heated up
and the remaining water is evaporated,
causing condensation to form in the
oven compartment and on the door.
 This condensation needs to be wiped
off the door and the oven
compartment once the oven has
cooled down.
 or an
will