Miele DO 7860 Operating And Installation Instructions page 65

Change type of heating
The M Chef + Moisture Plus
uses M Chef + Fan Plus
of moisture as standard.
The Moisture Plus  function uses
Plus with the addition of moisture as
standard.
You can also use moisture with another
method of heating instead of with
:
Plus
- Conventional Heat
- Intensive Bake
-
Auto Roast
 Select
Change .
 Select
Open further settings
 Select
Change type of heating
 Select the type of heating you want.
 Confirm with OK.
Cooking will be carried out using the
selected type of heating.
With the M Chef + Moisture Plus
function, Gourmet units are also added
to the food.
 function
with the addition
Fan
Fan
.
.

Functions using moisture
Injecting bursts of steam

Danger of injury caused by
steam.
Steam can cause severe scalding.
In addition, steam condensing on the
control panel will cause the sensor
controls and the touch display to
react more slowly.
Do not open the door during a burst
of steam.
Automatic burst of steam
Once the heating-up phase is
completed, the steam is released
automatically.
The water will evaporate in the oven
compartment and
will appear in the display.
After the burst of steam,
will appear in the display.
finished
 Continue cooking until the end of the
programme.
Manual
You can release the bursts of steam as
soon as Start Manual burst of steam
appears.
Please wait until the heating-up phase
is completed to allow the steam to be
distributed evenly by the warm air in
the oven.
Useful tip: Refer to the recipes in the
cookbook or the Miele@mobile App for
tips on when to release the bursts of
steam. Use the  Minute minder
to remind you of the timing.
Burst of steam active
Burst of steam
function
65