On/Off sensor
The On/Off sensor is recessed and reacts to touch.
It is used for switching the Dialog oven on and off. As soon as the Dialog oven is
switched on, the M Chef logo lights up on the top left-hand side of the control
panel.
Sensor controls
The sensors react to touch. Every touch of a sensor is confirmed by a keypad
tone. This keypad tone can be switched off by selecting the
Off
setting.
If you want the sensor controls to respond even when the Dialog oven is
switched off, select
Sensor
|
QuickTouch
On with time
Function
Depending on which menu you are in, this will take you back a
level or back to the main menu.
If a menu appears in the display or if a cooking programme is in
progress, you can use this sensor to set a minute minder (e.g.
when boiling eggs on the cooktop) or an alarm (a specific time)
at any point (see "Alarm + minute minder").
If a menu is visible in the display or if a cooking programme is
running when you open the door, touching the sensor will
switch the oven interior lighting on or off.
The oven interior lighting switches off automatically after about
1 minute.
Volume
.
Controls
|
Keypad tone
|
21