Installing The 3102 Telephone Label Plate; Attaching And Adjusting The Articulating Support Bracket - 3Com 3102 User Manual

Installing the 3102
Telephone Label
Plate
Attaching and
Adjusting the
Articulating
Support Bracket
For information about the underside of each 3Com Telephone, and for
information about how to connect any 3Com Telephone or Attendant
Console to a Power over Ethernet source, see the packing sheet that
comes with the device.
The following device support brackets have built-in strain relief
clamps: 3101, 3102, 3103, 3105, and 3100.
The 3Com 3102 Business Telephone has a label plate with localized
button labels that you must install. Once you snap the plate onto the
telephone, you cannot remove it.
To install the plate, slip the tabs along the top edge of the plate into the
slots on the telephone, and then press firmly along the bottom edge of
the plate until you feel it snap into place.
Figure 13 3Com 3102 Label Plate
The articulating support bracket is common to the following devices:
3Com 3105 Attendant Console
3Com 3102 Business Telephone
Figure 14, Figure 15, and
Telephone. The instructions apply to all of these devices.

Installing the 3102 Telephone Label Plate

Figure 16 show the 3Com 3102 Business
123