Feature Codes With 3Com Telephones - 3Com 3102 User Manual

108 C 8: F
HAPTER EATURE
Feature Codes with
3Com Telephones
C
ODES
hear the Error Tone if you make an error such as trying to enter an
unsupported feature code, an invalid extension, or an invalid
password. Hang up and start the feature code sequence again.
Feature Active Tone — Example: You activate one of the
"persistent" features, for instance, you lock your telephone, and then
hang up. The next time that you pick up the handset on your analog
telephone, you hear the Feature Active Tone. This pair of tones, a
sound followed by a higher sound, is repeated to remind you that you
have enabled one of these features:
Caller ID Restriction — All
Do Not Disturb
Forward All Calls to Voice Mail (that is, to your call coverage point)
Lock or Unlock Your Telephone
Call Forward All
Call Forward Busy
Call Forward No Answer
These features are "persistent," that is, each one remains active until
you turn it off, as described in
If you forget which of the persistent features you have activated on
your telephone, log in to NBX NetSet > User Information > Feature
Settings. See
how to log in to the NBX NetSet utility.
Exception: If you have activated one or more persistent features and your
mailbox has messages, you hear the New Messages Dial Tone whenever
you pick up the handset until you have deleted all messages.
A large number of telephone features are available by pressing the
Feature button on a 3Com Telephone and entering a three-digit feature
code. These feature codes are listed in
If your telephone does not have a button programmed for Feature,
ask your administrator to program one.
Because your administrator determines whether some of the features
that are described in this chapter are available for your telephone or
for the entire system, some of these features may not be available to
you.
Table
"NBX NetSet Utility"
9.
in Chapter 1 for information on
Table 9.