Paging The System; Paging Zones - 3Com 3102 User Manual

Paging the System

Paging Zones

When you page the system, you broadcast a message to all internal
extensions with speakers, to a Public Address (PA) system, or to both
simultaneously. Paging codes, as described in
for each destination.
Table 8 Paging Codes
Feature
External Paging
Broadcast an announcement over a
public address system that has a
paging amplifier and speaker system
that is connected to your NBX system
Internal Paging
Broadcast an announcement through
the speakers on all NBX Telephones
with speakers on your system except
those that have been set to Do Not
Disturb.
Simultaneous Paging
Broadcast an announcement externally
and internally at the same time.
To page, perform the following steps using your 3Com Telephone:
1 Pick up the handset.
2 Dial the appropriate paging code on your system.
3 Speak the broadcast message into your handset and hang up.
A page zone is a subset of internal extensions to which you can direct a
broadcast using a configured extension. You can page a zone, a P.A.
system, or both the zone and the P.A. system simultaneously. Zone
extensions are configured by the administrator.
To discover the page zone extensions on your system:
1 Log in to NBX NetSet > Personal Information > User Information >
Page Zones.
The NetSet utility lists the existing page zones and their extension
numbers.
2 Click Details to list the members of each zone.
Table 8, have default values
3-digit dial plan 4-digit dial plan
(default codes) (default codes)
620 6200
621 6201
622 6202
Paging 95