3Com 3102 User Manual page 29

Figure 4 Access Buttons on 3Com 1102, 2102, and 2102-IR Telephones
1
2
3
4
5
6
Access buttons have these default settings, which your administrator can
change:
1 Feature button — Allows you to access features that are not directly
assigned to an Access button on your telephone. See
of features and codes and how to use them.
2 Direct Mail Transfer button — Sends a call directly to another user's
voice mailbox. See
3 Call Park button — Allows you to place a call in a "holding pattern" so
that it can be retrieved from any other telephone on the system. See
"Call Park" in Chapter
4 Flash button (analog line only) — Toggles the current call to another
call if the line has the Call Waiting service from your local telephone
company, or enables call transfer if the line has the Call Transfer service.
5 Unassigned — This button has no default assigned function.
6 Release button — Disconnects calls. Useful when you use a telephone
headset. See "Using a Headset"
7 Typically, you can use these nine buttons for personal speed dial settings,
although the administrator can map them to other features. See
Dials" in Chapter
8 In most circumstances, your administrator designates these three system
appearance buttons as lines for incoming and outgoing calls.
7
8
"Direct Mail Transfer"
7.
in Chapter
6.
Programmable Access Buttons
Chapter 8
in Chapter 7.
6.
29
for a list
"Speed