Starting The Nbx Netset Utility; Navigation And Shortcut Icons In The Nbx Netset Utility - 3Com 3102 User Manual

16 C 1: G
HAPTER ETTING
Starting the NBX
NetSet Utility
Navigation and
Shortcut Icons
in the NBX NetSet
Utility
S
TARTED
To use the NBX NetSet utility, you need a computer that is connected to
your local area network (LAN) and that has a web browser. (You do not
need Internet access.) To start the NBX NetSet utility:
1 Ask your administrator for the IP address (or DNS host name) for your
NBX system. In the web browser on your computer (Microsoft Internet
Explorer version 5.5 or later is optimal), enter the IP address (or DNS host
name) in the Address field, and then press Enter. The NBX NetSet utility
login screen appears.
You cannot log in to the NBX NetSet utility until you establish your
password through your telephone using NBX voice prompts or the
Feature Code sequence. See
2 Click User to log in as a user. The password dialog box appears.
3 Type your NBX NetSet utility user identification (always your 3-digit or
4-digit telephone extension) and your NBX NetSet utility password, and
then click OK.
The icons at the lower right of any Personal Settings window allow you
or your administrator to navigate to the following features:
Table 5 Navigation Icons
Icon Action
Back
Help
Click the icons below the window to go directly to these features:
One-Touch Speed Dials
(not available on 3Com® 3100
Entry Telephone)
Off-Site Notification
Table 4 earlier in this chapter.
Where You Go
For the User goes to the main NBX NetSet utility login
dialog box
For the Administrator goes to the NBX NetSet utility main
menu window
Help for the fields and procedures related to the screen