Installing The 3102 Telephone Label Plate; Attaching And Adjusting The Support Bracket - 3Com 3102 Manual

Installing the 3102
Telephone Label
Plate
Attaching and
Adjusting the
Support Bracket
telephone will not work unless it is connected properly. Ask your
administrator if you have questions about your telephone connection.
The underside of an VCX telephone or attendant console includes:
1 AC power adapter connection (optional on the 3101, 3102, and 3105)
2 Ethernet connector for connection to the LAN
3 Ethernet connector for an optional connection to your desktop computer
4 Handset connector
5 Headset connector (3102 only)
6 Tabs for the support bracket
For information about the underside of each VCX Telephone, and for
information about how to connect any VCX Telephone or Attendant
Console to a Power over Ethernet source, see the packing sheet that
comes with the device.
Strain relief clamps are built into the 3101/3102/3105 support
bracket.
The VCX 3102 Business Telephone has a label plate with localized button
labels that you must install. Once you snap the plate onto the telephone,
you cannot remove it.
To install the plate, slip the tabs along the top edge of the plate into the
slots on the telephone, and then press firmly along the bottom edge of
the plate until you feel it snap into place.
Figure 13 VCX 3102 Label Plate
The articulating support bracket is common to the following devices:
VCX 3105 Attendant Console
VCX 3101 and 3101SP Basic Telephones

Installing the 3102 Telephone Label Plate

117