Ricoh Aficio 1013 Service Manual page 124

USING SERVICE PROGRAM MODE
7
Mode Number/Name
801 ROM Versions and Option Connections
Note: SP7-801 cannot be accessed at the screen. This information appears on SMC
printouts only. (Go to SP5-992 and select "2" to print out all data. The SP-801
information will appear in the "LOG DATA" section on the second page of the printout.
[ ☛ 5.1.5])
1 Firmware Version
2 No meaning (Fixed at "VER. 1")
3 Fax Unit ["Yes" = installed, "No" = Not installed]
4 Printer Unit ["Yes" = installed, "No" = Not installed]
5 ADF ["Yes" = installed, "No" = Not installed]
6 Optional Memory ["No" (None installed), "32MB", "40MB", "64MB"]
7 Paper Tray Unit ["Yes" = installed, "No" = Not installed]
8 Bypass Type ["1" = 1 sheet / "100" = 100-sheet]
803* PM Counter Display
1
804 PM Counter Reset
1
807 SC/Jam Counter Reset
1
808 Reset Counters
1
B044/B045/B046
Function/[Setting]
Shows software versions and option connection statuses.
Displays the PM counter value (the count since the last
PM).
Resets the PM counter.
[0 = No / 1 = Yes]
After selecting "1", hold down the Original Type key and
press the OK key (or ' key) to execute the reset. If the
reset is successful, the display shows "Action completed."
If the reset fails, the display shows "Error!!!".
Resets the SC counter and all jam counters.
[0 = No / 1 = Yes]
After selecting "1", hold down the Original Type key and
press the OK key (or ' key) to execute the reset. If the
reset is successful, the display shows "Action completed."
If the reset fails, the display shows "Error!!!".
Resets all counters, except for the total counter (SP7-
003).
[0 = No / 1 = Yes]
After selecting "1", hold down the Original Type key and
press the OK key (or ' key) to execute the reset. If the
reset is successful, the display shows "Action completed."
If the reset fails, the display shows "Error!!!".
5-20 SM