Service Call Conditions - Ricoh Aficio 1013 Service Manual

4. TROUBLESHOOTING

4.1 SERVICE CALL CONDITIONS

4.1.1 SUMMARY
There are two service-call levels, as follows.
Level
To prevent possible damage to the
machine, level-A service calls can be
cleared only by a service representative
A
The machine will not operate until the
representative clears the call.
These SCs can be cleared by turning
B
the main power switch off and on.
NOTE: 1) If a problem involves circuit boards: Before deciding to replace a circuit
board, first see if you can solve the problem by disconnecting and then
reconnecting all connectors.
2) If a problem involves a motor lock: Check the mechanical load first,
before deciding whether to replace motors or sensors.
3) If working on a fax-equipped machine, keep in mind that switching
power off and back on may in some cases cause loss of data stored in
SAF memory.
SM
Definition
4-1
SERVICE CALL CONDITIONS
Reset Procedure
Enter SP 5-810 (SC code reset) and
select "1". Then simultaneously press
the Original Type key and the OK (or
!) key. (There is no need to turn the
main switch off and on.).
Turn the main power switch off and on.
B044/B045/B046