USING SERVICE PROGRAM MODE
5.1.5 SMC PRINTING (SP5-992)
1. Access SP5-992.
2. Select the type of data you wish to print: "1" to print SP settings only, "2" to
print all system parameters (including SP settings), or "3" to dump a selected
memory range.
3. If you selected "3", press the OK key and then use the cursor and numeric keys
to enter the address range to be dumped.
4. Press & to access the copy mode display.
5. Select the print conditions (paper size, print density, etc).
6. Press & again to print the list.
7. Press ! to exit from copy mode.
8. Press ! as necessary to exit this SP.
NOTE: This report only requires the copier to print. it does not need the printer
or fax option to generate the report.
B044/B045/B046
5-26
SM