3.11.2 PSU BRACKET
1. FCU (☛ 3.10)
NOTE: After removing the copy tray, leave the front door open.
2. Remove the 4 screws at [A].
3. Unscrew the 6 screws securing the
PSU bracket [B], and detach the 4
connectors.
NOTE: Use a stubby screwdriver to
remove the 2 screws at [C].
4. Hold the PSU bracket at the rear
(viewing from the front of the
machine), pull the rear end out to the
left slightly, then lift the bracket
upward at the rear so that it comes
free of the hooks [D] at the front.
5. Pull the PSU bracket out.
SM
[A]
[C]
[B]
3-29
LASER UNIT
B046R905.WMF
[D]
B046R906
B044/B045/B046