GBC AdvancedPunch Pro Service Manual page 322

10. For COMM, COMPLETE is NOT displayed.
The system automatically returns to the previous screen.
LOADING

Press the ENTER button to return the then MAIN / COMM
screen.
MAIN
COMM
11. Press the down arrow to scroll through the Firmware Upgrade options
until the return symbol is next to the Word EXIT.
FIRMWARE UPGRADE
EXIT
12. Press the ENTER button when the return symbol is next to the word
EXIT to return to the top level screen.
READY
SINGLE PUNCH
13. Remove the USB flash drive with the firmware file you uploaded.
14. Install the Cover for USB port and tighten the Screws (2).
15. Switch off the machine. Wait 10 seconds, and then switch the
machine back on again.
General Procedures and Information
*
*
*
09/11/2018
6-52
GBC AdvancedPunch Pro