GBC AdvancedPunch Pro Service Manual page 170

3. Disconnect Cable 7715485 at the Chip Tray Home Switch.
Chip Tray Home Switch
Screws (2)
4. Remove the Screws (2) and the old Chip Tray Home Switch Bracket.
5. Place the new Chip Tray Home Switch Bracket in position and tighten
the Screws (2).
6. Connect Cable 023N01327 at the Chip Tray Home Switch.
7. Put the Chip Tray in position and push the Chip Tray Assembly in
firmly until it latches.
8. Close the Front Door.
9. Connect the Power Cord.
10. Power ON the entire printing system.
Repairs/Adjustments
Cable
08/20/2015
4-82
GBC AdvancedPunch Pro