GBC AdvancedPunch Pro Service Manual page 279


A - offset moves the position of the punch holes toward the trail
edge of the paper (decreases the Backgauge depth).

The maximum Backgauge change is + 10.4mm and - 5.4mm.
15. Press the ENTER button to enter the new Backgauge value.
This displays the MID / PREVIOUS MENU screen.
MID
PREVIOUS MENU
16. Press the ENTER button to display the SAVE VALUES screen.
SAVE VALUE?
YES

To select YES, press the ENTER button.

To select NO, press the down arrow button, to move the bent
arrow. Then press the ENTER button.
17. This displays the BACKGAUGE / ALIGNMENT screen.
BACKGAGE
ALIGNMENT
NOTE: The BACKGAGE feature has the option to save as it defines
the backgauge for that particular die type. This means that for any die
of that type inserted into that machine, the saved backgauge will
apply. If the user does not save the new backgauge, the next time a
die of this type is inserted the machine it will revert to the default
depth for that die.
GBC AdvancedPunch Pro
NO
09/11/2018
6-9
General Procedures and Information