GBC AdvancedPunch Pro Service Manual page 174

16. Disconnect the Connector for Sensors S16 and S17.
17. Disconnect the Connector for Punch Motor M10.
(Cont.)
Repairs/Adjustments
18. Do the following to remove the Punch Module Mount Bracket (Lock
Plates).

Use a Phillips Head Screwdriver to loosen the Captive Screw
from the left Punch Module Mount Bracket.

Remove the left Punch Module Mount Bracket.

Use a Phillips Head Screwdriver to loosen the Captive Screw
from the right Punch Module Mount Bracket.

Remove the right Punch Module Mount Bracket.
08/20/2015
4-86
GBC AdvancedPunch Pro