GBC AdvancedPunch Pro Service Manual page 315


If you want to change another Skew Offset, press the down arrow
to scroll through the Skew Offset options, then repeat the this
entire step for the other Skew Offset option.
6. From any Skew Offset screen, you can scroll up or down through the
entire list of Skew Offset options.
BG DP L RIGHT
BG DP XL LEFT
7. If you use the down arrow to scroll through the complete list of skew
offset options, the system displays the following screens.
BG DP XL RIGHT
PREVIOUS MENU
PREVIOUS MENU
EXIT

You may return to the main Service mode menu or Exit to the Top
level screen.
(Cont.)
GBC AdvancedPunch Pro
*
*
*
09/11/2018
Holes parallel to the edge.
To check Skew, fold the sheet as shown.
The last holes should line up.
General Procedures and Information
6-45