GBC AdvancedPunch Pro Service Manual page 119

9. Do REP 2.3 to remove the Acceleration Idler Roller Panel.
Acceleration Roller Idler Assembly
10. Unhook the Acceleration Panel Latch Springs (2).
Acceleration Panel Latch Springs
11. Unhook the Springs (2) from the Idler panel side.
GBC AdvancedPunch Pro
12. Do REP 2.22.1 to remove the Drive Roller for Roller N5.
13. Open the Cable Clamps and release the Sensor Cables.
Cable Clamps
14. Disconnect the Sensor Board Connectors (2) and the Clear Cover
Sensor.
(Cont.)
08/20/2015
4-31
Drive Roller
Sensor Board
Connectors
Repairs/Adjustments