Telnet Information; Quick Setup Ip Information - 3Com OfficeConnect Remote 812 Cli User's Manual

4-4 C 4: Q S
HAPTER UICK ETUP

TELNET information

Question
Do you want to allow command line management via
TELNET?
For TELNET management of the system, you need to create a user name and
password to control access.
Question
What user name will be allowed to manage this system?
What password will be used for this user ?

Quick Setup IP Information

The OCR 812 uses a network name to identify the network for future
management commands.
Question
Enter the network name of your IP network:
Enter the IP address for the OfficeConnect Remote
812:
The IP mask can be specified either as a class ("A", "B", or "C"), the number of
one bits in the mask, or as an address in the format 255.x.x.x.
Question
What should the mask be set to?
You need to specify the framing for the IP network. It should be either
"ethernet_ii" or "snap".
Question
What is the framing for the IP network?
You can use the Routing Information Protocol (RIP) to exchange routing
information with other routers on the network.
Question
Do you want to run RIP?
Choose the version of RIP to run:
Default
[yes]
Default Your System
[root]
[ ]
Default
[ip]
[192.168.200.25
4]
Default Your System
[C]
Default Your System
[ethernet_ii]
Default Your System
[yes]
[v2]
Your System
Your System