Output Counters; Input Counters; Show Ip Counters; Show Ip Settings - 3Com OfficeConnect Remote 812 Cli User's Manual

show ip counters

Displays system wide IP network statistics.

INPUT COUNTERS

OUTPUT COUNTERS

show ip settings

Displays system wide IP information.
show ip network Displays parameter settings for the specified IP network. See the set ip network
<network_name> command on page 29 for additional details.
settings
Total Input Datagrams - sum of IP datagrams received


Bad Headers - number of datagrams with bad headers


Bad Addresses - number of datagrams with bad addresses


Forwarded Packets - number of packets forwarded


Bad Protocol - number of packets received with bad protocol


Discarded - number of packets discarded


Successfully Delivered - number of packets successfully received


Total Output Datagrams - sum of datagrams transmitted


Discarded - number of datagrams discarded


Bad Routes - number of datagrams with a bad route


Fragments Needing Reassembly - # of fragmented datagrams


Datagrams Successfully Reassembled - # of broken datagrams


successfully reassembled
Reassembly Failures - # of broken datagrams unsuccessfully reassembled


Datagrams Successfully Fragmented - datagrams successfully broken


before transmission
Fragmentation Failures - failed datagram fragmentations before


transmission
Total Fragments - sum of fragments transmitted


IP Dynamic Address Pool Begin - start of IP address range


IP Dynamic Address Pool Size - size of IP address range


IP System Host Address - IP address of the system


IP Forwarding - ENABLE or DISABLE forwarding of IP packets


Interface - interface this IP network runs on


Network Address - network address of this IP network


Frame Type - frame type used by the interface


Status - ENABLED, ACTIVE, INACTIVE, DISABLED


Reconfigure Needed - This is TRUE or FALSE.


Mask - subnet mask used by this IP network


Station - station address of this IP network


CLI Commands B-47