Delete Nat [Dynamic | Static Vc <Vc Name> Public_Pool_Start <Address>; Delete Network Service <Service_Name>; Delete Snmp Community <Name>; Delete Snmp Trap_Community <Name> - 3Com OfficeConnect Remote 812 Cli User's Manual

B-12 A B: CLI C
PPENDIX OMMAND
delete nat
[dynamic | static ]
vc <vc name>
public_pool_start
<address>
delete network service
<service_name>
delete snmp
community <name>
delete snmp
trap_community
<name>
delete syslog
<ip_name_or_address>
delete tftp client
<ip_name_or_address>
delete tunnel
<tunnel_name>
delete user <name>
delete vc <name>
D
ESCRIPTION
public_address <ip_address>


Deletes the static NAT mapping to this public IP address for the associated VC.
Parameter Description
<vc_name> The name of the vc for which you are deleting the static NAT mapping.
public_address The public IP address of the static NAT mapping you wish to delete.
public_pool_start <ip_address>


Deletes the dynamic NAT mapping to this pool of public IP address for the
associated VC.
Parameter Description
<vc_name> The name of the vc for which you are deleting the dynamic NAT mapping.
public_address The public IP pool start address of the dynamic NAT mapping you wish to
delete.
Deletes the specified network service from the list of available services. You must
use disable network service before deleting the service. You can see which services
are available and active using list available services and list services.
Deletes an SNMP community that was previously added with the add snmp
community command. You can use list snmp communities to see the current
entries.
Deletes an SNMP trap community name from the list of names and IP addresses
that are allowed to receive SNMP trap commands. You can use list snmp
communities to see the current entries.
Deletes the specified IP host name or IP address from the list of addresses which
are authorized to receive syslog information. Use list syslog to see the currently
allowed addresses.
Deletes the specified IP host name or IP address from the list of addresses which
are authorized to TFTP. Use list tftp clients to see the currently allowed addresses.
Deletes the specified tunnel.
Deletes a user you previously added to the local user table. Use list users to see the
currently defined user, and show user to see the attributes you assigned to that
user using the add user or set user command.
Deletes a virtual channel profile. Use list vc to see the currently defined VCs, and
show vc to see the attributes of a specific VC. A VC must be disabled before it can
be deleted.