Show Interface <Interface_Name> Counters; Output Counters; Show Interface <Interface_Name> Settings - 3Com OfficeConnect Remote 812 Cli User's Manual

B-46 A B: CLI C
PPENDIX OMMAND
show interface
<interface_name>
counters
show interface
<interface_name>
settings
D
ESCRIPTION
Echos - sum of ICMP Echo (request) messages sent


Echo Replies - sum of these messages sent


Timestamps - sum of these messages sent


Timestamp Replies - sum of these messages sent


Address Masks - sum of these messages sent


Address Mask Replies - sum of these messages sent


Displays counters for the specified interface.
INPUT COUNTERS
Octets - bytes received


Ucast - Unicast packets received


MultiCast - Multicast packets received


BroadCast - broadcast packets received


Discards - Number of inbound packets which were chosen to be discarded


even though no errors had been detected to prevent their being deliverable
to a higher-layer protocol. One possible reason for discarding such a packet
could be to free up buffer space.
Errors - For packet-oriented interfaces, the number of inbound packets that


contained errors preventing them from being deliverable to a higher-layer
protocol. For character-oriented or fixed-length interfaces, the number of
inbound transmission units that contained errors preventing them from
being deliverable to a number of inbound transmission units that contained
higher-layer protocol.
Unknown Prot - unknown protocol in packet

OUTPUT COUNTERS

Octets - bytes transmitted


Ucast - unicast packets transmitted


MultiCast - multicast packets transmitted


Discards - Number of outbound packets which were chosen to be


discarded even though no errors had been detected to prevent their being
transmitted. One possible reason for discarding such a packet could be to
free up buffer space.
Errors - For packet-oriented interfaces, the number of outbound packets


that could not be transmitted because of errors. For character-oriented or
fixed-length interfaces, the number of outbound transmission units that
could not be transmitted because of errors.
Out QLen - length of the output packet queue (in packets)


Displays settings for the specified interface. The settings displayed depend on the
interface you specify, and so will not be shown here.