Delete Dns Host <Host_Name; Delete Dns Server <Domain_Name; Delete Filter <Filter_Name; Delete File <File_Name - 3Com OfficeConnect Remote 812 Cli User's Manual

delete dns host
<host_name>
delete dns server
<domain_name>
delete filter
<filter_name>
delete file <file_name>

delete framed route vc

delete ip network
<network_name>
delete ip route
<ip_address>
delete ipx network
<name>
delete ipx route
<ipx_net_address>
delete ipx service
<service_name>
delete pat tcp vc
<vc_name>
delete pat udp vc
<vc_name>
Deletes the specified host from the DNS Local Host Table. Use list DNS hosts to
view the DNS Local Host table. After deletion, requests for that host will be
processed through a DNS server, instead of locally. Use list DNS servers to see
which servers are defined.
Removes the name server addresses associated with the specified domain from the
Domain Name Server Table.
Removes the named filter from the filter table, and deletes the file stored in FLASH
memory. Use list filters to see what filter files are in FLASH memory.
Deletes a file from the FLASH file system. Use list files to see which files are
currently stored.
Deletes a framed route from the virtual channel profile.
Deletes an IP network from the interface that you specified when adding the
network. Use list ip networks to see which networks are associated with which
interfaces. Always use disable ip network before deleting it.
Deletes an IP address from the IP routing table, that you previously added with add
ip route. Deleting this route will cause IP packets destined for this network to use
the default route, which you can see using list ip routes. See add defaultroute
gateway to find out how to add a default route.
Deletes an IPX network on the interface you specified with the add ipx network
command. You can list ipx networks to see which are available, and the network's
status. Be sure to use the disable ipx network command before deleting the
network.
Deletes an IPX route on the interface you specified with the add ipx route
command. The list ipx routes command displays the current IPX routes.
type [service_type]


Deletes a static IPX service from the IPX services table. This command will work
only if a complete match on all parameters is found. Refer to add ipx service
command for more information.
Parameter Description
service name Designation of IPX service.
type Type of service: file/server, print, etc.
public_port [number]


public_port [number]


CLI Commands B-11