B-54
A
B: CLI C
PPENDIX
OMMAND
show snmp settings
show system
D
ESCRIPTION
Total Set MIB Objects - sum of MIB objects altered successfully as the
result of receiving valid SNMP Set-Request PDUs
Get Request PDUs - sum of SNMP Get-Request PDUs accepted and
processed
Get Next Request PDUs - sum of SNMP Get-Next PDUs accepted and
processed
Set Request PDUs - sum of SNMP Get-Next PDUs accepted and processed
Get Response PDUs - sum of SNMP Get-Response PDUs accepted and
processed
Trap PDUs - sum of SNMP Trap PDUs accepted and processed
OUTPUT COUNTERS
Packets - sum of SNMP packets transmitted
Too Big Errors - sum of SNMP PDUs generated by SNMP and for which the
value of the error-status field is `tooBig'
No Such Name Errors - sum of SNMP PDUs generated by SNMP and for
which the value of the error-status field is `noSuchName'
Bad Value Errors - sum of SNMP PDUs generated by SNMP and for which
the value of the error-status field is `badValue'
General Errors - sum of SNMP PDUs generated by SNMP and for which the
value of the error-status field is `genErr'
Get Request PDUs - sum of SNMP Get-Request PDUs sent from SNMP
Get Next Request PDUs - sum of SNMP Get-Next PDUs sent from SNMP
Set Request PDUs - sum of SNMP Set-Request PDUs sent from SNMP
Get Response PDUs - sum of SNMP Get-Response PDUs from SNMP
Trap PDUs - sum of SNMP Trap PDUs sent from SNMP
Displays SNMP settings, which you can modify using enable or disable snmp
authentication traps commands.
Authentication Traps - ENABLED (default) or DISABLED
Displays system information.
System Descriptor - for example:
3Com OfficeConnect™ Remote 812 V1.0.0, Built on Oct 31 1998 at
11:33:05.
Object ID - identifies this system to SNMP managers
System UpTime - time the system has been running since last boot
System Contact - modify using set system
System Name - modify using set system
System Location - modify using set system
System Services - for example, Internet End To End Applications
System Version - loaded version of the system software
Need help?
Do you have a question about the OfficeConnect Remote 812 and is the answer not in the manual?
Questions and answers