Table of Contents
Advertisement
2.5
MOVING BETWEEN SCREENS
At the second menu on every screen you can choose among the screens that are part of the
current application. This menu is called either Setup Screen (in the Acquisition application),
Setup (in the Listmode application), or Screen (in the other applications). First you select the
application you want from the Application menu, then you select which screen to use in that
application from the Setup Screen or Screen menu. Each screen title combines the current
Application name and the current screen name so that you know where you are in the software.
2.6
USING YOUR NETWORK WORKSTATION AND SERVER
The Network Workstation and Server are optional computer systems. The Network
Workstation can be used to analyze data and create Worklists off-line. The Server can be used
to archive data and as a network database server.
The Server can only be used as a network database server and should not be used as a
SYSTEM II software Workstation. Create Worklists and perform off-line data analysis on a
separate Workstation. SYSTEM II software cannot be used on the Server while it is in use as a
network database server.
Your Network Workstation uses LANtastic
XL-MCL systems.
You can use the Network Workstation or server to bridge to your own network. You must
validate your own network connection. Coulter has validated the connection between the XL
or XL-MCL flow cytometer and the Workstation or server using LANtastic software.
The Network is used to download to the Workstation data files [Listmode (LMD), Histogram
(HST), Patient Report, exported data files (EPT), and Cytometer setting files (CYT) and
database records (DBF)] for archival, off-line analysis, or report generation.
The Network is used to upload worklists, protocols, panels, and database records to the XL or
XL-MCL flow cytometer.
Your XL or XL-MCL flow cytometer can send files to and receive files from a Workstation or
Server; however, the Workstation or Server cannot pull files from an XL or XL-MCL flow
cytometer or transfer files to an XL or XL-MCL flow cytometer.
There can be more than one Workstation or Server on the network. The XL or XL-MCL flow
cytometer cannot be a Server.
The Network is configured in the config.sys and autoexec.bat files at installation. The XL or
XL-MCL flow cytometer software does not treat a network drive any differently from other drives.
PN 4237238BA
APPLICATION NAME
SCREEN NAME
®
software to connect to one or more XL or
LEARNING THE BASICS
MOVING BETWEEN SCREENS
7238197B
2-13
2
Advertisement
Table of Contents
