Oil Life Reset - If Equipped; Instrument Cluster Display Selectable Items - Jeep GLADIATOR 2020 User Manual

Hide thumbs Also See for GLADIATOR 2020:
Table of Contents

Advertisement

Push the down arrow button to scroll
downward through the main menu and
submenus
(Speedometer,
Vehicle Info, Off-Road, Driver Assist, Fuel
Economy, Trip Info, Stop/Start, Audio,
Navigation, Messages, Screen Setup and
Speed Warning).
Push the right arrow button to access the
information screens or submenu screens
of a main menu item.
Push the left arrow button to access the
information screens or submenu screens
of a main menu item.
Push the OK button to access/select the
information screens or submenu screens
of a main menu item. Push and hold the
OK button for two seconds to reset
displayed/selected features that can be
reset.
Oil Life Reset — If Equipped
Your vehicle may be equipped with an engine
oil change indicator system. The "Oil Change
Required" message will display in the instru-
ment cluster display for five seconds after a
single chime has sounded to indicate the
next scheduled oil change interval. The
engine oil change indicator system is duty
60
cycle based, which means the engine oil
change interval may fluctuate, dependent
MPH/km/h,
upon your personal driving style.
Unless reset, this message will continue to
display each time you place the ignition in
the ON/RUN position. To turn off the
message temporarily, push and release the
OK button. To reset the oil change indicator
system (after performing the scheduled
maintenance), refer to the following proce-
dure.
Oil Life Reset
1. Without pushing the brake pedal, cycle
the ignition to the ON/RUN mode (do not
start the engine).
2. Navigate to "Oil Life" submenu in
"Vehicle Info" in the instrument cluster
display.
3. Push and hold the OK button until the
gauge resets to 100%.
Secondary Method For Oil Change Reset Proce-
dure
1. Without pushing the brake pedal, cycle
the ignition to the ON/RUN position (do
not start the engine).
2. Fully press the accelerator pedal, slowly,
three times within ten seconds.
3. Without pushing the brake pedal, cycle
the ignition to the OFF/LOCK position.
NOTE:
If the indicator message illuminates when
you start the vehicle, the oil change indicator
system did not reset. If necessary, repeat
this procedure.
Instrument Cluster Display Selectable
Items
NOTE:
Depending on the vehicles options, feature
settings may vary.
The instrument cluster display can be used
to view the following main menu items:
Speedometer
Vehicle Info
Off-Road - If Equipped
Driver Assist - If Equipped
Fuel Economy
Trip Info
Stop/Start — If Equipped

Advertisement

Table of Contents
loading

Table of Contents