Table of Contents
Advertisement
Automatic Climate Control Descriptions
Icon
Description
MAX A/C Button
Press to change to the coldest setting, the indicator illuminates when MAX A/C is on. Pressing the button again
causes the MAX A/C operation to switch into manual mode and the MAX A/C indicator turns off.
NOTE:
The MAX A/C button is only available on the touchscreen.
A/C Button
Press and release to change the current setting. The indicator illuminates when A/C is on.
Recirculation Button
Press and release this button on the touchscreen, or push the button on the faceplate, to change the system
between recirculation mode and outside air mode. Recirculation can be used when outside conditions, such as
smoke, odors, dust, or high humidity are present. Recirculation can be used in all modes. Recirculation may be
unavailable (button on the touchscreen greyed out) if conditions exist that could create fogging on the inside of the
windshield. The A/C can be deselected manually without disturbing the mode control selection. Continuous use of
the Recirculation mode may make the inside air stuffy and window fogging may occur. Extended use of this mode
is not recommended.
AUTO Button
Automatically controls the interior cabin temperature by adjusting airflow distribution and amount. Toggling this
button causes the system to switch between manual mode and automatic modes.
Refer to "Automatic Operation" within this section for more information.
34
Advertisement
Table of Contents
