Table of Contents
Advertisement
6. Position both Tonneau Cover latches over
the locking mechanisms (one on each
side of the truck bed), making sure the
plastic retainer is correctly seated in the
forward part of the latch.
Correctly Seated Retainer
Incorrectly Seated Retainer
7. Once the rear Tonneau Cover bar is posi-
tioned over the locking mechanism,
grasp the back of the Tonneau Cover and
push downward on the center to engage
the locking mechanisms.
NOTE:
Make sure an audible "click" from both sides
of the Tonneau Cover are heard to confirm
that the latch is completely engaged.
Push Downward To Lock
NOTE:
If desired, the Tonneau Cover can be left in
this position and the tailgate can be raised to
the mid-position. Refer to "Tailgate" in
"Getting To Know Your Vehicle" in the
Owner's Manual for further information.
Tonneau Cover With Tailgate In Mid-Position
8. The tailgate can now be raised and
secured in place.
NOTE:
The
Tonneau
Cover
must
completely prior to fully closing the tailgate.
CAUTION!
Do not sit on the Tonneau Cover; damage
to the cover and/or cargo will occur.
be
closed
57
Advertisement
Table of Contents
