Table of Contents
Advertisement
Halogen Headlamps
1. Open hood and support using prop rod.
2. Remove the front grille. Turn the
retainers along the top a quarter turn
counterclockwise and remove.
3. Pull the bottom of the grille away,
starting at one side and working toward
the other.
4. Remove the three screws holding the
headlamp to the vehicle.
5. Remove lamp from the vehicle.
6. Remove the lamp from the collar.
7. Grasp the bulb and rotate a quarter turn
counterclockwise.
8. Pull the bulb from the housing.
9. Push connector locking tab to the unlock
position.
10.Remove connector from bulb.
11.Push connector onto new bulb base, and
push the connector locking tab to the
lock position.
CAUTION!
Do not touch the new bulb with your
fingers. Oil contamination will severely
shorten bulb life. If the bulb comes in
contact with any oily surface, clean the
bulb with rubbing alcohol.
12.Reinstall bulb housing. Rotate the bulb a
quarter turn clockwise.
Front Park/Turn Signal
1. Remove the front wheel liner fasteners to
access bulb sockets.
Wheel Liner
2. Turn the socket assembly a quarter turn
counterclockwise
and
remove
housing. Pull the bulb straight from the
socket to replace.
LED Front Side Marker
1. Remove the front wheel liner fasteners to
access side maker screw and electrical
connector.
2. Remove fastening screw in the back of
the front side maker assembly and
disconnect electrical connector.
3. Remove and replace LED front side
marker light assembly.
Halogen Front Fog Lamp
1. Reach under the vehicle to access the
back of the front fog lamp.
2. Disconnect the wire harness connector
from the front fog lamp connector recep-
tacle.
3. Firmly grasp the bulb by the two latch
features and squeeze them together to
unlock the bulb from the back of the
front fog lamp housing.
4. Pull the bulb straight out from the keyed
opening in the housing and then connect
the replacement bulb.
from
175
Advertisement
Table of Contents
